Преобразуватели
JUMO dTRANS T01 - Two-Wire Transmitter (707010)
- Designs for B head or DIN-rail mounting
- RTD temperature probes and thermocouples
- Galvanic isolation
- Output two-wire 4 to 20 mA, HART® interface
- Also available with Ex approval
- Configuration with setup program
JUMO dTRANS T02 – Four-Wire Transmitter (707020)
Type 707025 will be discontinued in 2021 with order availability until September 30, 2021 at the latest.
The successor product is the multifunctional four-wire transmitter JUMO dTRANS T06 Ex (data sheet 707075)
- Design width 17.5 or 22.5 mm
- Mounting on DIN rail, 35 mm
- Universal measurement input
- Galvanic isolation
- Current output, voltage output
- Ex and IECEx approval
- Configuration with setup program
JUMO dTRANS T03 - Two-Wire/Three-Wire Transmitter (707030)
- Designs for B head, J head, or DIN-rail mounting
- Pt100
- Analog measured value processing
- Output: two-wire (4 to 20 mA) or three-wire (0 to 10 V)
- Configuration with setup program
JUMO dTRANS T04 − Four-Wire Transmitter (707040)
Type 707040 will be discontinued in 2021 with order availability until September 30, 2021 at the latest.
The following device series can be used as a successor product:
- Multifunctional four-wire transmitter JUMO dTRANS T06 Junior (data sheet 707070)
- Temperature transmitter JUMO dTRANS T08 02 / T08 12 (data sheet 707101)
- Design width 22.5 mm
- Pt100, Pt1000, and potentiometer
- Adjustable with DIP switches
- Analog measured value processing
- Output 0(4) to 20 mA, 0 to 10 V
- Configuration with setup program
JUMO dTRANS T05 - Programmable Two-Wire Transmitter (707050)
- Measuring input for RTD temperature probe, thermocouple, resistor/potentiometer, resistance transmitter, and voltage
- Input and output are galvanically isolated
- Control LED (red/green)
- Configuration directly via USB cable without additional auxiliary voltage
- Customer-specific linearization
- Detection of the min./max. process value (drag indicator function including point in time)
JUMO Wtrans B - Programmable Head Transmitter with Wireless Data Transmission (707060)
- For stationary and mobile measurements
- Universal measurement input
- Radio frequency 868.4 MHz
- Open air range up to 300 m
- Configurable transmission interval (1 to 3600 s)
JUMO dTRANS T06 – Multifunctional Four-Wire Transmitter (707070)
- High level of galvanic signal isolation
- Customer-specific linearization
- Output simulation
- Min. and max. drag indicator function
- Operating hours counter
- Convenient setup configuration (USB powered)
JUMO dTRANS T06 - Multifunctional Four-Wire Transmitter in Mounting Rail Case (707071)
- Universal input for a large number of sensors and standard signals
- Intuitive operation and configuration on the device or through USB interface with setup program
- RS485 interface (Modbus RTU) and relay output limit value (option)
- Intelligent additional functions such as min./max. drag indicator, operating hours counter, and output simulation
- SIL 2/SIL 3 according to DIN EN 61508 and PL c/d according to DIN ISO 13849 (option)
- Sensor matching for RTD temperature probes
- Customer-specific linearization
- High galvanic signal separation
- Service and operation hours counter
- Connection diagram retrievable in the display
JUMO dTRANS T06 Ex – Multifunctional Four-Wire Transmitter in Mounting Rail Case with SIL and Ex Approval (707075)
• Universal input for a large number of sensors and standard signals
• SIL 2/SIL 3 according to DIN EN 61508 and PL c/d according to ISO 13849
• Reliable operation through sensor monitoring and hardware error detection
• ATEX and IECEx approval
• Customer-specific linearization
• Intuitive operation and configuration on the device or via USB interface with setup program
• RS485 interface (option)
• Intelligent additional functions such as min./max. drag indicator, operating hours counter, and output simulation
• Connection diagram can be viewed in the LCD display
JUMO dTRANS T07 – Two-Channel Temperature Transmitter with HART®/Ex/SIL (707080)
- 2 universal measurement inputs (RTD, TC, Ω, mV)
- High degree of accuracy (0.1 K with Pt100 sensor)
- Output 4 to 20 mA (single channel, loop powered)
- 2 enclosure versions (B-head or DIN rail)
- HART® 7 protocol
- SIL 2/3 hardware/software according to IEC 61 508
- Reliable measurement mode through sensor monitoring and device hardware error detection
- Optional plug-on display for B-head device version
Ex-i Repeater Power Supply / Input Isolating Amplifier (707530)
- HART capable
- SIL2 approval
- Universal power supply